Side by side comparison and review of Xiaomi Redmi Buds 3 and Philips TAT4556WT. Compare design, sound quality and other key specifications and features to simplify the choice of your perfect headphones. Our goal is to make it easier for you to decide on the headphones that will best meet your expectations by revealing the main differences between the products.
| DESIGN AND DIMENSIONS | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Product Type | True wireless earphones - Bluetooth - wireless | True wireless earphones - Bluetooth - wireless | |
|---|---|---|---|
| Height | 1.69 cm | - | |
| Width | 4.07 cm | - | |
| Depth | 1.87 cm | - | |
| Weight | 4.5 g | - | |
| Dimensions & Weight Details | Earphone: 4.07 cm x 1.87 cm x 1.69 cm / 4.5 g Charging case: 4.96 cm x 2.44 cm x 4.96 cm |
Earbud: 2.31 cm x 2.67 cm x 2.43 cm Charging case: 7.1 cm x 4 cm x 3.1 cm |
|
| Colour | White | White | |
| Protection | Spill-resistant | Splashproof, sweat-resistant | |
| Recommended Use | Portable electronics | Portable electronics | |
| Bluetooth Range (Operating Distance) | 10 m | 10 m | The maximum operating distance of both headphones is the same. |
| SOUND QUALITY | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Headphones Form Factor | Ear-bud | In-ear | |
|---|---|---|---|
| Headphones Technology | - | Dynamic | |
| Connectivity Technology | Wireless | Wireless | |
| Wireless Technology | Bluetooth | Bluetooth | |
| Bluetooth Version | Bluetooth 5.2 | Bluetooth 5.2 | Both headphones have the same Bluetooth version. |
| Bluetooth Profiles | - | Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP) | |
| Bluetooth Audio Codec | - | AAC | |
| Active Noise Cancelling | Yes | Yes | Both headphones are equipped with active noice cancellation. |
| Active Noise Cancelling Technology | - | Adaptive Hybrid ANC | |
| Frequency Response | - | 20 - 20000 Hz | |
| Max Input Power | - | 10 mW | |
| Sensitivity | - | 98 dB | |
| Impedance | - | 16 Ohm | |
| Diaphragm | 12 mm | 12 mm | Both headphones are designed with same thick diaphragm. |
| Features | QuickPair Function, built-in Qualcomm QCC3040 chip | 2-in-1 convertible from stereo to mono sound |
| MICROPHONE | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Form Factor | Built-in | Built-in | |
|---|---|---|---|
| Noise Cancelling | Yes | - | Xiaomi Redmi Buds 3 microphone can cancel out ambient noise. |
| Noise Cancelling Technology | cVc (clear Voice capture) by Qualcomm | - | |
| Microphones Included | 2 | - |
| REMOTE CONTROL | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Controls | Play/pause, next/previous track, answer call | Voice assistant |
|---|
| CABLE | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Cable Type | USB-C charge cable - detachable | USB-C cable - detachable - 28 cm |
|---|
| FEATURES | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Features | - | Touch control |
|---|
| BATTERY AND CHARGING | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Battery Type | Headphone battery rechargeable - lithium polymer | Headphone battery rechargeable - lithium polymer | |
|---|---|---|---|
| Battery Capacity | 35 mAh | 50 mAh | Philips TAT4556WT have a higher battery capacity than Xiaomi Redmi Buds 3. |
| Battery Life | 5 hour(s) | 9 hour(s) | Philips TAT4556WT lasts longer on a single charge than the Xiaomi Redmi Buds 3. |
| Battery Life Details | Continuous playback: up to 5 hours Continuous playback (with included charging case): up to 20 hours |
- | |
| Charging Time | - | 2 hour(s) |
| CONNECTIONS | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Connector Type | USB (power only) (USB Type-C) | USB (power only) (USB Type-C) |
|---|
| OTHERS | Xiaomi Redmi Buds 3 | Philips TAT4556WT |
|---|
| Included Accessories | Charging case (310 mAh) | 3 pairs of ear tips (small, medium, large), charging case (500 mAh) | |
|---|---|---|---|
| Compliant Standards | IP54 | IPX4 | |
| Service & Support | Limited warranty - 2 years | - |
cs
sk
de
it
es
fr
hu
pt
ru
pl
br
ro
