Side by side comparison and review of Philips TAT5506BK and Xiaomi Buds 3T Pro. Compare design, sound quality and other key specifications and features to simplify the choice of your perfect headphones. Our goal is to make it easier for you to decide on the headphones that will best meet your expectations by revealing the main differences between the products.
| DESIGN AND DIMENSIONS | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Product Type | True wireless earphones - Bluetooth - wireless | True wireless earphones - Bluetooth - wireless | |
|---|---|---|---|
| Height | 3 cm | - | |
| Width | 7 cm | - | |
| Depth | 4.2 cm | - | |
| Weight | 64 g | 4.9 g | Xiaomi Buds 3T Pro are lighter than Philips TAT5506BK headphones. |
| Dimensions & Weight Details | - | Earphone: 4.9 g Charging case with earphones: 48 g |
|
| Colour | Black | White lacquer | Carbon black | |
| Protection | Sweat-resistant, water-resistant | Dust-resistant, water-resistant | |
| Recommended Use | Portable electronics | Portable electronics | |
| Bluetooth Range (Operating Distance) | 10 m | 10 m | The maximum operating distance of both headphones is the same. |
| High-Resolution Audio | - | Yes |
| SOUND QUALITY | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Headphones Form Factor | In-ear | In-ear | |
|---|---|---|---|
| Headphones Technology | - | Dynamic | |
| Connectivity Technology | Wireless | Wireless | |
| Wireless Technology | Bluetooth | Bluetooth | |
| Bluetooth Version | Bluetooth 5.2 | Bluetooth 5.2 | Both headphones have the same Bluetooth version. |
| Bluetooth Profiles | Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP) | Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP) | |
| Bluetooth Audio Codec | SBC, AAC | LHDC 4.0 | |
| Active Noise Cancelling | Yes | Yes | Both headphones are equipped with active noice cancellation. |
| Active Noise Cancelling Technology | Hybrid Active Noise Cancelling Pro | - | |
| Sound Output Mode | - | Hi-Fi stereo | |
| Sound Effects | - | Dual transparency mode, Dimensional audio technology | |
| Frequency Response | 20 - 20000 Hz | - | |
| Max Input Power | 5 mW | - | |
| Total Harmonic Distortion (THD) | - | <0.08% | |
| Sensitivity | 105 dB | - | |
| Impedance | 16 Ohm | 32 Ohm | |
| Diaphragm | 10 mm | Diamond-like carbon (DLC) | |
| Magnet Material | Neodymium | Neodymium | |
| Features | Awareness Mode, Voice Enhanced Mode | CCAW coil, HRTF professional tuning |
| MICROPHONE | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Form Factor | Built-in | Built-in | |
|---|---|---|---|
| Noise Cancelling | Yes | Yes | The microphones on both headphones can cancel out ambient noise. |
| Noise Cancelling Technology | Environmental Noise Cancellation (ENC) | - | |
| Microphones Included | 2 | 3 | Xiaomi Buds 3T Pro have a built-in microphone. |
| REMOTE CONTROL | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Controls | - | Pinch control |
|---|
| CABLE | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Cable Type | USB-C charge cable | USB-C charge cable - detachable |
|---|
| FEATURES | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Features | - | Up to 24 bit / 96 kHz audio | |
|---|---|---|---|
| Sensors | - | Force sensor |
| BATTERY AND CHARGING | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Battery Type | Headphone battery rechargeable - Lithium Ion - - wireless charging | Headphone battery rechargeable - wireless charging | |
|---|---|---|---|
| Battery Capacity | 55 mAh | 38 mAh | Philips TAT5506BK have a higher battery capacity than Xiaomi Buds 3T Pro. |
| Battery Life | 7 hour(s) | - | |
| Battery Life Details | Continuous playback (noise cancelling ON): up to 7 hours Continuous playback (noise cancelling OFF): up to 8 hours Continuous playback (noise cancelling ON / with included charging case): up to 28 hours Continuous playback (noise cancelling OFF / with included charging case): up to 32 hours |
Continuous playback: up to 6 hours Continuous playback (with included charging case): up to 24 hours |
|
| Wireless Charging Standards | Qi | Qi | |
| Charging Time | 2 hour(s) | - |
| CONNECTIONS | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Connector Type | Bluetooth USB (power only) (USB Type-C) |
USB (power only) (USB Type-C) |
|---|
| OTHERS | Philips TAT5506BK | Xiaomi Buds 3T Pro |
|---|
| Included Accessories | 3 pairs of silicone ear tips, USB-C cable, charging case (550 mAh) | 3 pairs of silicone ear tips (small, medium, large), charging case (480 mAh) | |
|---|---|---|---|
| Compliant Standards | IPX5 | IP55 | |
| Service & Support | Limited warranty - 2 years | Limited warranty - parts and labour - 2 years |
cs
sk
de
it
es
fr
hu
pt
ru
pl
br
ro
