Side by side comparison and review of JBL Endurance Peak II and Philips TAT5506BK. Compare design, sound quality and other key specifications and features to simplify the choice of your perfect headphones. Our goal is to make it easier for you to decide on the headphones that will best meet your expectations by revealing the main differences between the products.
DESIGN AND DIMENSIONS | JBL Endurance Peak II | Philips TAT5506BK |
---|
Product Type | True wireless earphones - Bluetooth - wireless | True wireless earphones - Bluetooth - wireless | |
---|---|---|---|
Height | - | 3 cm | |
Width | - | 7 cm | |
Depth | - | 4.2 cm | |
Weight | 26 g | 64 g | JBL Endurance Peak II are lighter than JBL Endurance Peak II headphones. |
Colour | Coral orange | Blue | White | Black | Black | |
Protection | Waterproof, sweat-resistant, IPX7 | Sweat-resistant, water-resistant | |
Design | Sports | - | |
Recommended Use | Portable electronics | Portable electronics | |
Bluetooth Range (Operating Distance) | - | 10 m |
SOUND QUALITY | JBL Endurance Peak II | Philips TAT5506BK |
---|
Headphones Form Factor | In-ear - over-the-ear mount | In-ear | |
---|---|---|---|
Headphones Technology | Dynamic | - | |
Connectivity Technology | Wireless | Wireless | |
Wireless Technology | Bluetooth | Bluetooth | |
Bluetooth Version | Bluetooth 5.0 | Bluetooth 5.2 | Philips TAT5506BK have a more advanced version of Bluetooth than JBL Endurance Peak II. |
Bluetooth Profiles | - | Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP) | |
Bluetooth Audio Codec | - | SBC, AAC | |
Active Noise Cancelling | - | Yes | Philips TAT5506BK are equipped with active noice cancellation. |
Active Noise Cancelling Technology | - | Hybrid Active Noise Cancelling Pro | |
Sound Output Mode | Stereo | - | |
Sound Effects | Pure Bass | - | |
Frequency Response | 20 - 20000 Hz | 20 - 20000 Hz | Both headphones offer the same frequency response. |
Max Input Power | - | 5 mW | |
Sensitivity | 95 dB | 105 dB | Philips TAT5506BK have higher sensitivity than JBL Endurance Peak II. |
Impedance | 16 Ohm | 16 Ohm | |
Max Sound Pressure | 93 dB | - | |
Diaphragm | 10 mm | 10 mm | Both headphones are designed with same thick diaphragm. |
Magnet Material | - | Neodymium | |
Features | PowerHook | Awareness Mode, Voice Enhanced Mode |
MICROPHONE | JBL Endurance Peak II | Philips TAT5506BK |
---|
Form Factor | Built-in | Built-in | |
---|---|---|---|
Noise Cancelling | - | Yes | Philips TAT5506BK microphone can cancel out ambient noise. |
Noise Cancelling Technology | - | Environmental Noise Cancellation (ENC) | |
Sensitivity | -38 dBV/Pascal | - | |
Microphones Included | - | 2 |
REMOTE CONTROL | JBL Endurance Peak II | Philips TAT5506BK |
---|
Controls | On/off, answer/end, next/previous track, voice assistant | - |
---|
CABLE | JBL Endurance Peak II | Philips TAT5506BK |
---|
Cable Type | USB-C charge cable | USB-C charge cable |
---|
FEATURES | JBL Endurance Peak II | Philips TAT5506BK |
---|
Features | Touch control | - |
---|
BATTERY AND CHARGING | JBL Endurance Peak II | Philips TAT5506BK |
---|
Battery Type | Headphone battery rechargeable | Headphone battery rechargeable - Lithium Ion - - wireless charging | |
---|---|---|---|
Battery Capacity | 60 mAh | 55 mAh | JBL Endurance Peak II have a higher battery capacity than Philips TAT5506BK. |
Battery Life | 6 hour(s) | 7 hour(s) | Philips TAT5506BK lasts longer on a single charge than the JBL Endurance Peak II. |
Battery Life Details | Continuous playback: up to 6 hours Continuous playback (with included charging case): up to 30 hours |
Continuous playback (noise cancelling ON): up to 7 hours Continuous playback (noise cancelling OFF): up to 8 hours Continuous playback (noise cancelling ON / with included charging case): up to 28 hours Continuous playback (noise cancelling OFF / with included charging case): up to 32 hours |
|
Wireless Charging Standards | - | Qi | |
Charging Time | 2 hour(s) | 2 hour(s) | The charging of both headphones last the same time. |
CONNECTIONS | JBL Endurance Peak II | Philips TAT5506BK |
---|
Connector Type | - | Bluetooth USB (power only) (USB Type-C) |
---|
OTHERS | JBL Endurance Peak II | Philips TAT5506BK |
---|
Included Accessories | 3 pairs of ear tips, charging case (770 mAh) | 3 pairs of silicone ear tips, USB-C cable, charging case (550 mAh) | |
---|---|---|---|
Compliant Standards | IPX7 | IPX5 | |
Service & Support | - | Limited warranty - 2 years |